Product lines

QC2 Dip Tubes

Dip tubes from the QC2 product line are impressive due to their high number of adaptation possibilities to any container and due to a variety of materials and options.

Available Materials

High purity
HDPE/PP
PVDF
PTFE

Elec. conductive

HDPE/PP
PVDF
PTFE

Container bung-threads

G2"
NPT2"
NPS2"
S56
S62
S64
S70x5
S70x6
KS60
KS70

and many more.

Gaskets

LDPE
POE
EPDM

Available lengths:

0-1200 mm

Corresponding
Dispense-/Fill Heads

"DH-" QC2 product line
max. flow rate 25-50 l/min

In case of questions about transport approvals (UN/DOT) for the different dip tubes and dip tube closures, please contact our technical sales department or the relevant container manufacturer.

Technical Information
Datasheet Dip Tubes general
Instruction Dip Tubes

Please visit our download center for further downloads and other languages. Resources > Downloads.

Options

Bellows

The flexible bellows at the end of the dip tube can sit on the bottom of the container and thus enables the container to be completely emptied. For IBC containers with front bung o...
learn more →

Mixing nozzles

Using mixing nozzles on recirculation dip tubes, suspensions such as slurries can be optimally prepared below the liquid level. Also suitable for foaming media. Without moving co...
learn more →

Bottom-plate

Dip tubes with bottom-plate enable suction above the settled, too large particle aggregates in slurries. Available in product linesQC2G-Series...
learn more →

Suction cone

The streamlined design of the suction cone at the end of the dip tube allows an optimal suction of viscous media and those containing solids. Available in product linesQC2QC3G-Seri...
learn more →

Electrically conductive

Dip tubes made of electrically conductive plastic, for dispensing flammable liquids and for use in explosive atmospheres. Only to be used in conjunction with electrically conductiv...
learn more →

Manual insertion

If the container is not transported with the dip tube, the dip tube can also be inserted manually by hand. Optional wings at the dip tube stopper...
learn more →

Check valve

Dip tubes with an integrated check valve seal the container up to the connection of the Dispense Head. Made out of 100% plastic ...
learn more →

Emission protection film

A film made of PP inserted in the dip tube acts as an emission protection when connecting the Dispense Head. Only when pieced by the Dispense Head is the container fully opened. Wh...
learn more →

Coding pins

Our QC dip tubes can also be purchased uncoded and coded to the appropriate chemical as needed. If an additional optical differentiation between different chemicals is required, t...
learn more →

Type “S” - closed

The most widespread dip tube closure in the form of a 3/4” or 1” stopper. Dip tube article number ending: “S” A dust protection cap is supplied with QC2 dip tubes with “S” closure...
learn more →

Type “V” - ventilated

The ventilated version of type “S” with integrated PTFE non-woven fabric. Suitable for the transportation of hydrogen peroxide. Dip tube article number ending: “V” A dust protecti...
learn more →

Type “T” - closed

The alternative to type “S” if a tamper proof closure needs to be attached. Dip tube article number ending: “T” Can be combined with the folding tamper proof closure (QC accessory...
learn more →

Type “W” - ventilated

The ventilated version of type “T” with integrated PTFE non-woven fabric. Suitable for the transportation of hydrogen peroxide. Dip tube article number ending: “W” Can be combined...
learn more →

Type “SU” - double closure

The “SU” type offers double protection during transportation. The closure is screwed into the dip tube in addition to the “S” closure. Dip tube article number ending: “SU” (type “S...
learn more →

Dip tube closure with pressure relief valve

Manual pressure relief valves allow a controlled compensation of the pressure inside the container. For chemicals requiring ventilation Opens automatically in the event of negativ...
learn more →
check resistance

This might also interest you

Universal drum wrench

Universal drum wrench for safely opening, closing and fitting dip tubes and screw plugs.

learn more →

Key-code checker

Our QC dip tubes can also be purchased uncoded and easily be coded to the appropriate chemical as needed.
That reduces warehousing and improves flexibility. The use of key-code checkers helps in this respect and enables error-free operations.

learn more →

Tamper proof closures

To make sure that the container is not opened or otherwise manipulated during transportation, dip tubes can be equipped with tamper proof closures.
learn more →

Docking station for dip tubes

In case the dip tube has to be changed on site, the docking station for dip tubes provides a safe storage option. Material PE For dip tubes DT - DT3 - GT2 Item-no.: RDC-89745 ...
learn more →



Please visit our download center for further downloads and other languages. Resources > Downloads.